Wholesale API rotary roller three cones bit in stock based on the lowest quotation and excellent quality from China manufacturer Bit Description: IADC: 127 - Steel tooth journal sealed bearing bit with gauge protection for soft formations with low compressive strength and high drillability. Compressive Strength: 0 - 35 MPA 0 - 5,000 PSI Ground Description: Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals. We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 ” to 26”) and most of IADC Codes.
According to cutting material,three cones bit can be divided into TCI bit and Milled Tooth Bit Milled tooth tricone bit IADC127 is for very soft formation. Choose the proper rocks drilling bits is very important before starting project. Rocks hardness could be soft , medium and hard or very hard, hardness of one type of rocks may be also a little different, for example, limestone, sandstone, shale has soft limestone, medium limestone and hard limestone, medium sandstone and hard sandstone , etc. In drilling project, Far Eastern have 15 years and more than 30 countries services experience to supply the drill bits and advanced drilling soulutions for many different applications. The application including oil field,natural gas,geological exploration,driectional boring,mining ,water well drilling ,HDD, construction,and foundation.The various drill bits can be customized as per different rock formation becasue we have our own API & ISO certified factory of drill bits. We can give our engineer's solution when you can supply specific conditions, such as hardness of rocks,types of drilling rig,rotary speed,weight on bit and torque. It is also hlep us to find the siutable drill bits after you can tell us vertical well drilling or horizontal drilling ,oil well drilling or No-Dig drilling or foundation piling.| Basical Specification | |
| Size of Rock Bit | 11 5/8" |
| 295.3mm | |
| Bit Type | Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
| Thread Connection | 6 5/8 API REG PIN |
| IADC Code | IADC 127 |
| Bearing Type | Journal Sealed Roller Bearing |
| Bearing Seal | Rubber Seal |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
| Nozzles | 3 |
| Operating Parameters | |
| WOB (Weight On Bit) | 19,906-56,400 lbs |
| 89-251KN | |
| RPM(r/min) | 60~180 |
| Formation | Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc. |
11 5/8" tricone drill bit is a regular size in middle Asian countries and Russia, Ukraine, etc. We also have 11 5/8" IADC127G, IADC137G to drill different conditions. IADC217 is small and dense teeth, high grade HNBR O-ring sealed bearing and lubricated by grease compensating system. Advantage of steel tooth tricone bit 1>Higher penetration rate. The longer teeth has faster drilling down speed. 2>Anti-balling. The sticky rocks always make bit-balling, steel tooth tricone bit is suitable for drilling soft formations and sticky rocks. 3>IADC127 has tungsten carbide inserts on gauge of cones, this feature is well to avoid diameter-shrinkage.
