Tricone drill bits supplier IADC126 12 1/4 inches (311mm) for well drilling

Looking for high-quality tricone drill bits for well drilling? Look no further than our IADC126 12 1/4 inch (311mm) tricone bits. As a factory supplier, we ensure superior performance and unbeatable prices. Trust us for your drilling needs.

Request a Quote
  • Tricone drill bits supplier IADC126 12 1/4 inches (311mm) for well drilling
  • Tricone drill bits supplier IADC126 12 1/4 inches (311mm) for well drilling
  • Tricone drill bits supplier IADC126 12 1/4 inches (311mm) for well drilling

PRODUCTS DETAILS

Wholesale API milled tooth sealed tricone roller cones bits in the stock based on the lowest price and excellent quality from China factory Bit Description: IADC: 126 - Steel tooth journal sealed bearing bit for soft formations with low compressive strength and high drillability. Compressive Strength: 0 - 35 MPA 0 - 5,000 PSI Ground Description: Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals. We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 7/8” to 26”) and most of IADC Codes.As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price. Far eastern drilling quality and technology will help you to achieve more! Milled teeth tricone bit is used for drilling soft formations, the advantage is higher ROP(Rate of Penetration) than TCI tricone bit, it has faster drilling down speed than Tungsten Carbide Insert tricone bit in drilling mudstone or other sticky rocks. TCI tricone bit is suitable for drilling hard rocks, but bit-balling always happens in drilling soft and sticky formations which prevents drill bit going down. The steel tooth tricone bits has longer teeth than TCI tricone bits so that it can drill soft formations at high ROP. In oil drilling projects, the ROP could reach 30 meters per hour in shallow section drilling. When you choose a FAR EASTERN drill bit, you get the right bit for the right application, so you can stay in the hole longer with fewer trips, at a lower cost-per-foot. Because we’ve been engineering this technology successfully for more than 15 years, we are confident in our legacy and that no other drill bit manufacturer can match our expertise. Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications. As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price. Far eastern drilling quality and technology will help you to achieve more!

Basical Specification

Size of Rock Bit

12 1/4"

311 mm

Bit Type

Steel Tooth Tricone Bit/ Milled tooth Tricone Bit

Thread Connection

6 5/8 API REG PIN

IADC Code

IADC 126

Bearing Type

Journal Sealed Roller Bearing

Bearing Seal

Rubber Seal

Heel Protection

Unvailable

Shirttail Protection

Available

Circulation Type

Mud Circulation

Drilling Condition

Rotary drilling,high temp drilling,deep drilling,motor drilling

Nozzles

3

Operating Parameters

WOB (Weight On Bit)

20,971-59,419 lbs

93-264KN

RPM(r/min)

60~180

Formation

Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc.

table
12 1/4" Inches Sreel Tooth Tricone Bit IADC126 Soft Formation Well Drilling Dense teeth on cones of tricone bits means smaller teeth and harder rocks drilling capacity, shorter and smaller teeth makes milled teeth tricone drill bit can even drill soft or medium hardness rocks and the ROP is higher than TCI tricone bits. Surface of cones are enhanced by tungsten carbide hard-facing. Please contact us to get more information. Choose the correect and suitable IADC code to reach the best cost-effective, we are pleasant to choose the right tricone bits according to your geological information. Far Eastern Drilling attends exhibitions in many countries worldwide, hopefully to talk with you face to face in near future.

Hot Products

Rotary tricone Bits IADC517 9 7/8" (250mm) for hard rock

Rotary tricone Bits IADC517 9 7/8" (250mm) for hard rock

Replaceable Single Roller Cone Cutters for Piling Bucket Drills

Replaceable Single Roller Cone Cutters for Piling Bucket Drills

API button drill bit IADC517 17 1/2" (444.5mm)

API button drill bit IADC517 17 1/2" (444.5mm)

API well drilling head IADC126 7 1/2 inches (190.5mm)

API well drilling head IADC126 7 1/2 inches (190.5mm)

8.5" inches fixed cutter PDC Bi center bit suppliers for rock drilling

8.5" inches fixed cutter PDC Bi center bit suppliers for rock drilling

GAV-2105 NRS 250LB IRON GATE VALVE WITH BRONZE SEAT RING

GAV-2105 NRS 250LB IRON GATE VALVE WITH BRONZE SEAT RING

Tricone rock bits IADC537 6 inches (152.4 mm)

Tricone rock bits IADC537 6 inches (152.4 mm)

China API 14 inches HDD PDC rock reamers factory in stock

China API 14 inches HDD PDC rock reamers factory in stock

API factory Bucket usage square arm roller cone bits for hard rock

API factory Bucket usage square arm roller cone bits for hard rock

API factory of  rock roller cones bits IADC437 8.5" for drilling

API factory of rock roller cones bits IADC437 8.5" for drilling

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours