Get High-Quality Rock Drilling Bits IADC537 from Leading Factory

Tender of API TCI drilling bits in the stock from China factory Bit Description: IADC: 537 - TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength . Compressive Strength: 85 - 100 MPA 12,000 - 14,500 PSI Ground Description: Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks. We can offer TCI bits in avariety of sizes (from 3" to 26") and all most of IADC codes.

According to cutting material,tirocne bit can be divided into TCI bit and Steel Tooth Bit . TCI is short for Tungsten Carbide Insert, tungsten carbide is regular hard material in rock drilling field, another material is diamond. Inserts means Tungsten Carbide teeth that's fitting on cones of rotary drilling roller cone bits. .API TCI tricone drill bit. IADC537 10 5/8" (269mm) have type of Rubber /Elastomer sealed bearing and Metal sealed bearing. We suggest that we had better choose metal face sealed bearing bits for deep rock wells with hard formations.For very deep well drilling, we recommend Metal-face sealed bearing tricone bits in drilling depth exceeds 1000 meters, For hard rock and long distance trenchless pilot hole drilling that length exceeds 300 meters we also recommend metal-face sealed bearing tricone bits.For water well drilling, shallow well drilling or shorter distance trenchless pilot hole drilling projects, elastomer(rubber) sealed bearing tricone bits has better cost performance.

Basical Specification
Size of Rock Bit	10 5/8 inches
Size of Rock Bit	269mm
Bit Type	TCI Tricone Bit
Thread Connection	6 5/8 API REG PIN
IADC Code	IADC 537G
Bearing Type	Journal Sealed Bearing with Gauge Protection
Bearing Seal	Elastomer or Rubber/ Metal
Heel Protection	Available
Shirttail Protection	Available
Circulation Type	Mud Circulation
Drilling Condition	Rotary drilling,high temp drilling,deep drilling,motor drilling
Nozzles	Three Nozzles
Operating Parameters
WOB (Weight On Bit)	60,444-27,188 lbs
WOB (Weight On Bit)	169-121KN
RPM(r/min)	50~220
Formation	Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc.

10 5/8" is 269 mm in diameter, the thread connection is 6 5/8 reg pin according to API specification. IADC537 means that tricone roller bit is suitable for drilling medium hardness rocks like limestone, shale, gypsum, etc. The bearing is elastomer sealed to increase working life. Tungsten carbide inserts(TCI) is very hard alloy to drilling hard rocks, the heel of cones and arm-back are full inserted with Tungsten Carbide teeth. It is a common size in mining field, to drill blast hole. In mining drilling, first number for IADC code are usually 6,7,8,and the third number are usually 2 and 5. According to IADC specifications for tricone bit,"2" means standard open bearing roller bit,and "5" means sealed roller bearing bit with gauge protection. In some countries, 10 5/8"(269mm) is often used to drill water well and geothermal well. Drill rig is circulated by mud fluid,instead of compressing air. Therefore, for different applications, we should choose the suitable tricone roller bits. Far eastern drilling quality and technology will help you to achieve more !

1. How to get an exact quotation? Answer: Please send us detailed information as below: -Tricone bits(Diameter, IADC code) -PDC bits(Matrix or Steel body, blades quantity, cutter size, etc) -Hole opener(Diameter, size of pilot hole, hardness of rocks, thread connection of your drill pipe, etc.) -Roller cutters(Diameter of cones, model number, etc.) -Core barrel(Diameter, quantity of cutters, connection, etc.) A simple way is sending us photos . Besides above, if possible please provide more information as below: Drilling depth in vertical well drilling, Drilling length in HDD, hardness of rocks, Capacity of drill rigs, application(oil/gas well drilling, or water well drilling, or HDD, or foundation). Incoterm: FOB or CIF or CFR, by plane or ship, port of destination/discharge. The more information provided, the more exact quotation will be offered. 2. What is the quality control for your products? Answer: All of our production are in lines of API rules and ISO9001:2015 strictly, from signing contract , to raw materials, to each production processes, to product finish, to after-sale service, each processes and sections are in accordant with standard. 3. About lead time,payment terms, delivery ? Answer: We always have regular models available in stock, prompt delivery is one of our advantages. Mass production depends on quantity of order. We accept all regular payment terms including L/C, T/T, etc. We are near from Beijing airport and Tianjin(Xingang) seaport, transportation from our factory to Beijing or Tianjin only takes one day, fast and very economical inland charges. 4. What is the history of Far Eastern ? Answer: The drilling bits business was started at year 2003 only for China domestic requirement, the name Far Eastern was started from year 2009, now Far Eastern has exported to more than 35 countries and areas. 5. Do you have Referenced Letters /Recommendation Letters from old customers? Answer: Yes, we have many referenced letters/recommendation letters issued by old customers who would like to share our stories.