Wholesale API tricone rock bit in stock based on the lowest quotation and excellent quality for deep well. Bit Description: IADC: 127 - Steel tooth journal sealed bearing bit with gauge protection for soft formations with low compressive strength and high drillability. Compressive Strength: 0 - 35 MPA 0 - 5,000 PSI Ground Description: Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals. We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 ” to 26”) and most of IADC Codes.
This superior method provides a stronger, more impact-resistant tooth than milling because the metal particle structure during forging is protected, resulting in stronger teeth. The details of Steel tooth Bit. Far Eastern Drilling heat treatment process selectively carburizes the bearing wear surface to ensure the toughness of the structure. This provides long-lasting and reliable bearing performance. Critical tooth hard-facing process is continually monitored and updated to ensure the highest quality hard facing deposit. Steel tooth drills are suitable for extremely soft formations with low compressive strength and high drillability such as clay, mudstone, chalk, etc. They are also suitable for medium strata with high compressive strength, such as soft shale, anhydrite, medium soft limestone, medium soft sandstone. Medium stratum with a hard interlayer.| Basical Specification | |
| Size of Rock Bit | 12 1/4" |
| 311.1mm | |
| Bit Type | Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
| Thread Connection | 6 5/8 API REG PIN |
| IADC Code | IADC 127 |
| Bearing Type | Journal Sealed Roller Bearing |
| Bearing Seal | Rubber Seal |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
| Nozzles | 3 |
| Operating Parameters | |
| WOB (Weight On Bit) | 28,971-59,419 lbs |
| 93-264KN | |
| RPM(r/min) | 60~180 |
| Formation | Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc. |
Dense teeth on cones of tricone bits means smaller teeth and harder rocks drilling capacity, shorter and smaller teeth makes milled teeth tricone drill bit can even drill soft or medium hardness rocks and the ROP is higher than TCI tricone bits. Surface of cones are enhanced by tungsten carbide hard-facing. Please contact us to get more information, Far Eastern attends exhibitions in many countries worldwide, hopefully to talk with you face to face in near future.
